GE Fanuc IC698ETM001 Ethernet Interface Module

Product Description

The GE Fanuc IC698ETM001 is an Ethernet interface module designed to deliver high-performance Ethernet communications for RX7i control systems. It operates at an Ethernet processing speed of 200 MHz and requires a +5 VDC power supply with a maximum current draw of 1.5A. This module facilitates TCP/IP communications with other GE Intelligent Platforms control systems and host computers, providing robust Ethernet connectivity.

Features

• Full Configuration and Programming Services: Allows complete configuration and programming through Ethernet.
• Ethernet Global Data (EGD): Supports intermittent data exchange with EGD Class 2 functionality and Reliable Data Service (RDS) for accurate command message communication.
• Station Management and Diagnostic Tools: Includes comprehensive management and diagnostic capabilities.
• Full-Duplex Ports: Features auto-negotiated network speed and crossover detection via an internal network switch.
• Redundant IP Addressing: Enables assigning a redundant IP address to two Ethernet modules in different controllers, with only the active unit's interface using the redundant IP.

Technical Information

• Ethernet Processor Speed: 200 MHz
• Module Operating Voltage: +5 VDC (from power supply)
• Module Current Drain: 1.5A maximum; 1.2A typical
• Module Operating Temperature: 0°C to +60°C (32°F to 140°F)
• LEDs: MODULE OK, LAN ONLINE STATUS, 100 LINK P1, 100 LINK P2
• IEEE Standards: IEEE 802.2 Logical Link Control Class I, IEEE 802.3 CSMA/CD Medium Access Control 10/100 Mbps

Ethernet and Connectivity

• Number of IP Addresses: One
• Ethernet Ports: Two, 10BaseT / 100BaseTX with auto-sensing, RJ-45 connector, 8-pin female, shielded
• Embedded Ethernet Switch: Yes, for daisy chaining of Ethernet nodes
• Serial Port (Station Manager Port): RS-232 DCE, 1200 - 115200 bps, D-connector, 9-pin female

Technical Specifications

• Manufacturer: GE Fanuc
• Series: Versamax
• Part Number: IC698ETM001
• Product Type: Ethernet Interface Module
• Ethernet Processor Speed: 200 MHz
• Operating Voltage: 5 Volts DC
• Current Draw: 1.5 Amps
• Operating Temperature: 0 to 60 degrees Celsius
• Number of IP Addresses: 1
• Ethernet Ports: 2